X-ring
X-Rings - The O-ring alternative for light dynamic applications
X-rings (also called four-lip seals) are an alternative to O-rings for use in light dynamic applications. X-Rings achieve high sealing efficiency at low compression and pressures because the mould parting line does not coincide with the sealing surfaces.
Advantages of X-Rings
Thanks to the four-lip geometry, the pockets between the sealing lips can absorb lubricant, resulting in significantly reduced friction. In linear applications, the geometry prevents the seal from twisting in the groove and thus damaging the seal. Under normal operating conditions the groove mass of O-rings can be used. Slightly increasing the groove depth reduces the compression. For even lower friction coefficients, the X-rings can also be surface treated on request.
Application areas of X-rings
X-rings offer particular advantages in light dynamic applications of oscillating or linear movements. Due to their easy assembly and the attractive price/performance ratio, these four-lip seals can be used in almost all industries, such as the fittings industry, on valves, in hydraulics and pneumatics, in the automotive industry or in general plant and machine construction.
X-Rings in NBR in a variety of inch dimensions available from stock
Nitrile rubber X-rings made of NBR 70.315-04 are permanently available from stock in a variety of inch dimensions. Other materials or dimensions are available on request.